Skip to content Skip to content

Products

Custom Electronic Products and Embedded Boards

The platform

Nexor modular platform

Carrier 25 × 35 mm · 6 layer
Nexor carrier board - modular platform for CAN sensors and converters - Nexilica
Face A · Aeris Face B · Bliss
Platform / CAN FD carrier

Nexor

One carrier. Two faces.
A whole line.

Power, processing and the CAN FD bus sit on the carrier. The function is defined by the daughter board soldered on top, recognised at power-up along with its own calibration.

5Mbit/s
CAN FD
2faces
Auto ID
125°C
Up to
Explore the platform Datasheet
Daughter board They solder onto the carrier, one per face
Sensor Available Aeris Aeris Pressure, humidity and temperature on one face of the carrier: it stays readable even in condensation, thanks to the built-in heater. Specifications Specifications Aeris NXL-AERIS-10A
rev 1.0a Pressure 15 - 400 kPa Humidity 0 - 100 %RH Temperature -40 / +125 °C Components Automotive-grade Full datasheet
Converter Available Bliss Bliss SSI interface for absolute encoders and sensors. It reads and powers the device over a single field cable. Specifications Specifications Bliss NXL-BLISS-10A
rev 1.0a Interface SSI over RS-422 Cable up to ~100 m Sensor 9 - 28 V pass-through Temperature -40 / +125 °C Full datasheet
Your module

A measurement or an interface to bring onto CAN? We build it on the Nexor core.

Let's talk
The catalogue

Our boards

Products ready to integrate into your CAN system

CANnect electronic board - intelligent CAN-to-CAN bridge - Nexilica Gateway 02 CANnect Intelligent and Configurable CAN-to-CAN Bridge Bridges CAN networks running different baud rates or protocols by reading their DBC files, with no code to write. CAN 2× FDCAN Config DBC · zero-code Size 35 × 12 mm Learn More CANnect
Pressor electronic board - pressure temperature CAN bus sensor - Nexilica Sensor 03 Pressor Pressure, Temperature, and Humidity in a Single CAN Node Three measurements and a power output on one board: it drives alarms, fans or valves with no external PLC. Measures P · RH · T CAN CANopen Out MOSFET 35 V / 2 A Learn More Pressor
KIR23 electronic board - thermocouple infrared CAN bus controller - Nexilica Thermal sensor 04 KIR23 Dual Thermocouple and Infrared Input on CAN Bus Cold-junction compensation and digital calibration on both channels, for furnaces, presses and test benches. Inputs TC-K + IR CAN CANopen IR range -70 / +380 °C Learn More KIR23
DOCUMENTATION · DEMO

Want to see them in action?

Contact us for a demo, a quote or the complete technical documentation of our products.

Contact Us